PRODUCTS

YQL series gas-fired thermal fluid heater

YQL series gas-fired thermal fluid heater

Advantages

Digitized manufacture

The laying-off of steel tube adopts CNC 3D laser cutting machine.

The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.

The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Full argon arc welding

Square coil tube and coil tube all adopt argon arc welding technique,which guarantees tubes are 100% qualified.

Long life span

The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;

Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.

Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Easy operation

We have combustion arch patent, which is available for different types of coals, even the anthracite is very easy to burn.

Flame-proof feeding bucket can avoid the feeding bucket is burnt and coking.

There is ash cleaning unit, which is easy for maintaining, operating and cleaning.

Less fuel consumption

Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.

Furnace adopts double close line coil, which makes heating surface sufficient.

Overview

YQL vertical gas-fired thermal fluid heater uses fuel or gas as fuel, uses burner to burn fuel, uses heat transfer oil as heat carrier, uses circulating oil pump to force liquid phase circulation, and transfers heat energy to heat equipment, and then returns the current formula of reheated special industrial furnace.

YQL series gas-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

After the boiler is put out of the factory, it can be put into operation only when it is ventilated (oil). The heating surface of the boiler consists of four parts: the radiant heating surface of the furnace, the heating surface of the first convection tube bundle, the heating surface of the second convection tube and the energy-saving device (waste heat boiler).

Technical data

Model Rated thermal power(KW) Rated thermal power(x10 4kcal/h) Design working temperature(≤℃) Rated working pressure(MPa) Thermal efficiency(≥%) System installation power(KW)
YQL-7000Q 7000 600 320 0.8 90 140
YQL-8200Q 8200 700 320 0.8 90 140
YQL-9400Q 9400 800 320 1 90 200
YQL-10500Q 10500 900 320 1 90 200
YQL-12000Q 12000 1000 320 1 90 240
YQL-14000Q 14000 1200 320 1 90 320
YQL-16500Q 16500 1400 320 1 90 380
YQL-18000Q 18000 1600 320 1 90 450
YQL-21000Q 21000 1800 320 1 90 520
YQL-23300Q 23300 2000 320 1 90 600
YQL-26000Q 26000 2200 320 1 90 700
YQL-29200Q 29200 2500 320 1 90 825

Related Products

Classic Case

25tph SZL coal-fired steam boiler for paper mill
coal-fired steam boiler for paper mill

Project boiler medium: steam boiler
Location: Indonesia
Customer name: PT. WIRAJAYA PACKINDO

Read more
cases/
Biomass-fired boiler for rubber Thailand

Project boiler medium: Biomass-fired boiler (wood)
Location: Thailand
Customer name: SENTURY Tyre (Thailand) Co.,Ltd

Read more

Give Us your Feedback

Here you can submit any questions and we will get back to you as soon as possible.We will not disclose the information you submit to anyone,please rest assured.

FAQ| XML| Contact